Prevail Equipment
Dilution and Dispensing Equipment
Test Strips and Workplace Labels are available.
1 Way Mixing Station
The 1-Way Ball Valve Mixing Station is an ASSE 1055 certified chemical proportioner that accurately dilutes chemical to the required ratio and dispenses into any size container.
Resources:
- Installation and Operation Instructions
- Mixing Station Overview & Setup
- Requires 25-125 PSI Water
2 Way Mixing Station
The 2-Way Ball Valve Mixing Station is an ASSE 1055 certified chemical proportioner that accurately dilutes chemicals to the required ratios and dispenses into any size container.
Resources:
Model 25 Compact Airless Foamer
The Model 25 Compact Airless Foamer is a unique medium volume hose-end foam gun for diluting and applying foaming chemicals to any surface.
Resources:
MODEL 20 SS COMBO AIRLESS FOAMER/SPRAYER
This unit is an airless foam and spray applicator featuring a quick connect chemical injector that attaches to a pressure washer outlet. This venturi unit draws and blends chemical concentrate into the water stream to create an accurately diluted solution. The solution then flows through the hose and gun to the airless foam wand which injects atmospheric air to create and project wet, clinging foam onto surfaces up close or at distances up to 25 feet with interchangeable fan and zero-degree nozzles. Quick connect
the fan pattern sprayer nozzle to apply non-foaming chemicals.
Resources
UNI-BODY A-25 AIRLESS FOAMER
This unit is a medium volume foam applicator for projecting foaming chemicals on to any surface up close or at distances up to 6 feet without compressed air. This venturi injection system uses standard city water pressure (35 - 125 PSI) to draw and blend chemical concentrate into the water stream to create an accurately diluted solution. The solution then flows through the discharge hose to the “airless” foam wand which draws in atmospheric air to create and project wet, clinging foam.
Key Features
- No compressed air required
- The unique machined polypropylene uni-body design is both compact and cost-eff ective
- Designed for foam cleaning small to medium sized areas
- Projects a medium volume of wet, clinging foam which increases chemical contact time and eff ectiveness
- Foaming expands the chemical and reduces over-application by providing visual assurance of coverage
- Projects foam up to 6’ (depending on water pressure)
- Chemical resistant wetted components ensure years of outstanding performance with minimal maintenance
- Use it where 35-125 PSI water is available
Resources
A-40 AIRLESS FOAM WAND WITH FAN NOZZLE
Designed to replace the black soap nozzle on pressure washers that use a factory chemical injector. This Airless Foam Wand quick connects to a pressure washer gun and injects atmospheric air into the chemical solution to greatly increase volume and coverage ability. This stainless steel unit will create and
project wet, clinging foam on to any surface in a fan pattern
or zero degree stream for increased foam throw distance.
Resources
